LH-BM1000L 1-6 Layers Water Tank Blow Molding Machine
ADVANTAGES:
1.The temperature controlled by Seimens PLC,the extruder stops automatically if the temperature is down because of heater or thermocouples damaged.
2.There is die head pressure testing in the diehead.The PLC shots down the extruders if the pressure inside the die head is too high.
3.The extruders have covers for keeping the temperature, so can make the heating time short
4.The temperature are controlled by Siemens brand.
5.The extrusion motor is Siemens brand.
6.The inverter is Seimens brand
7.More protection in control system
2. Multi-Layers Die Head Technology
Adopt new integrated multi-layer die head design, from 1 layer to 6 layers, to ensure a stable wall thickness.The productivity of blow molding machine improve 5 times than traditional blow molding machine and the utilization rate of recycle material improve 4 times.
3. After Sales Service
Trainning
Buyer could dispatch their operators to our factory for training, including machine operation, maintenance & simple repairs;Or our egineers could train the buyer’s operators in the buyer’s factory in the periods of installing & adjusting.
Installation & adjustment:
The seller could dispatch an engineer against the requests of the buyer to install and adjust the machines for one week in the buyer’s factory.The buyer should make a reservation in advance before delivery of the machines.
The buyer should pay for the engineer’s visa application cost, round air tickets, food & board before his departure.
3.LH-BM1000L Blow Molding Machine Technical Specs
|
Model |
1 Layer |
2 Layer |
3 Layer |
4 Layer |
|
|
Basic
|
Processing Material |
PE&HDPE*HMHDPE |
|||
|
Product Capacity |
200-1000L |
||||
|
Total Power |
197.1KW |
278.2KW |
334.3KW |
395.4KW |
|
|
Average Consumption |
110KW |
130KW |
170KW |
210KW |
|
|
Machine Weight |
30T |
32T |
36T |
40T |
|
|
Overall Dimensions L*W*H |
8.5M×5M×6.3M |
9M×5.5M×6.5M |
9M×5.5M×6.5M |
10M×7.5M×6.5M |
|
|
Extrusion
|
Main Screw Diameter |
120 |
110/110 |
80/90/80 |
80*4 |
|
Screw Ratio |
30:1 |
30:1 |
30:1 |
30:1 |
|
|
Screw Material |
38CrMoALA |
||||
|
Drive Motor |
90KW |
75KW*2 |
45KW/55KW/45KW |
45KW*4 |
|
|
Heating Zone |
7 |
14 |
16 |
20 |
|
|
Heating Power |
30KW |
60KW |
70KW |
85KW |
|
|
Max Extruder Output |
280kg/h |
350kg/h |
350kg/h |
350kg/h |
|
|
Platform Lifting Stroke |
500mm |
||||
|
Lifting Motor Power |
1.5KW |
||||
|
Feeding
|
Feeding Mode |
Feeding Spring |
|||
|
Feeding Power |
1.1KW |
1.1KW×2 |
1.1KW×3 |
1.1KW×4 |
|
|
Feeding Volume |
300Kg/h |
600Kg/h |
900Kg/h |
1200Kg/h |
|
|
Hopper Material |
Stainless Steel |
||||
|
Accumulator |
Accumulator Volume |
35KG (According to product’s weight) |
|||
|
Accumulator Material |
38CrMoALA |
||||
|
Heating Power |
30KW |
60KW |
70KW |
80KW |
|
|
Heating Zone |
5 |
6 |
6 |
8 |
|
|
Die Core Size |
Accoring to the product capacity |
||||
|
Parison Thickness Adjust |
Moog 100 Points |
||||
|
Clamping
|
Mold Plate Size |
1500×1600mm |
|||
|
Claming Force |
800KN |
||||
|
Mold Plate Space |
1000-2500mm |
||||
|
Max. Mold Plate |
1200×1600mm |
||||
|
Hydraulic System |
Oil Tank Volume |
1000L+200L |
|||
|
Motor Power |
37KW +7.5W |
||||
|
Blowing Stroke |
250mm |
||||
|
Air Pressor |
0.6Mpa |
||||
|
Cooling System |
Cooling Mode |
Water Cycle |
|||
|
Recycled Water Pressure |
0.3Mpa |
||||
|
Recycled Water Amount |
180L/min |
||||
